Electro PDF-1
Electrolytic Grinding-Plates with fixed or rotative guide bearing for marble work with a perfect finish.
| Electro PDF-1 |
|---|
| With fixed or rotative guide bearing |
| Ø100 mm |
| M14 |
| Radius 5 - 10 - 15 - 20 - 25 - 30 mm |
Electro PDF-2
Electrolytic Grinding-Plates with fixed or rotative guide bearing for marble work with a perfect finish.
| Electro PDF-2 |
|---|
| With fixed or rotative guide bearing |
| Ø100 mm |
| M14 |
| Radius 10 - 15 - 20 - 25 - 30 mm |
Electro PDF-3
Electrolytic Grinding-Plates with fixed or rotative guide bearing for marble work with a perfect finish.
| Electro PDF-3 | |||
|---|---|---|---|
| Bevel 45º A x B mm |
L mm | Ø mm | Fastener |
| With fixed guide bearing | |||
| 5 x 5 | 7 | 100 | M14 |
| 10 x 10 | 14 | 100 | M14 |
| 15 x 15 | 21 | 100 | M14 |
| 20 x 20 | 28 | 100 | M14 |
| Bevel 45º A x B mm |
L mm | Ø mm | Fastener |
|---|---|---|---|
| Multiple bevel 45º changing the lower guide bearing. A single grinding plate with 3 guide bearings included to achieve bevels of 5, 10 and 15 mm. |
|||
| 5 x 5 | 7 | 100 | M14 |
| 10 x 10 | 14 | 100 | M14 |
| 15 x 15 | 21 | 100 | M14 |
Electro PDF-6
Electrolytic Grinding-Plates with fixed or rotative guide bearing for marble work with a perfect finish.
| Electro PDF-6 |
|---|
| With fixed or rotative guide bearing |
| Ø100 mm |
| M14 |
| Radius 8 + 8 // 10 + 10 // 15 + 15 mm |
Electro PDF-7
Anti-slip grooving
Electrolytic milling-cutter to make anti-slips on the stairs.
| Electro PDF-7 Anti-slip grooving | |||
|---|---|---|---|
| Ø mm | E mm | T mm | Fastener |
| The milling-cutter has two positions. Depending on the position of the milling cutter, the height T can be 22 or 32 mm. |
|||
| 53 | 28 | 22/32 | M-14 |
Vacuum PDF-7
Anti-slip flat
Vacuum milling-cutter to make flat anti-slips on the stairs.
| Vacuum PDF-7 Anti-slip flat | |||
|---|---|---|---|
| Ø mm | E mm | T mm | Fastener |
| For MARBLE, GRANITE AND SYNTHETIC MATERIALS | |||
| 52 | 25 | 15 | M-14 |
Electro PDF-8
Flat recess
Electrolytic milling-cutter to make frames around the bush hammered.
| Electro PDF-8 Flat recess | |||
|---|---|---|---|
| Ø mm | E mm | G mm | Fastener |
|
The milling-cutter is supplied with two sized probes. Is possible to make frames 15 and 20 mm wide just changing the internal probe. |
|||
| 104 | 10 | 1 | M-14 |
Electro PDF-Groove
| Electro PDF-Groove | |||
|---|---|---|---|
| Ø mm | E mm | T mm | Fastener |
| 63 | 6 | 15 | M-14 |
| 70 | 8 | 15 | M-14 |
| 70 | 10 | 15 | M-14 |